The Bluelab Guardian Monitor Connect continuously monitors the key parameters of pH, EC and temperature directly in your irrigation and nutrient feed line, with no need for manual measurements and spot checks. Any fluctuations are instantly visible on the Guardian Monitor’s large backlit LED display and issues can be solved as and when they happen. When used along with a Bluelab Connect Stick 2 (purchased separately) the user can log data from the Monitor to a local PC and adjust the Monitor settings from the PC. Bluelab Connect software (downloadable F.O.C.) allows multiple users to view data and status from a remote device (PC or smartphone) and receive real-time notifications of any alarms set up on the Controller.
Conductivity and temperature units can be set to the user’s preference. Discreet visual alarms can be set for the grower’s preferred parameter ranges to indicate whenever a parameter falls out of range. The water-resistant unit is easy to wall-mount or hang. It has two robust inline pH and conductivity probes which can withstand line pressure and turbulence and are screw-fitted (1” NPT thread) for easy calibration and cleaning. The combined conductivity and temperature probe requires no user calibration (the conductivity reading being automatically compensated for temperature), and the replaceable inline pH probe calibrates at the push of a button. LED calibration indicators remind the user when recalibration is due. Powered from the mains by a universal power adaptor.