English (United Kingdom)
Español
Pump Up Compression Sprayer - 8L
No. d'article
10-505-035
The Pump Up Compression Sprayer – 8L is the ideal tool for applying a foliar spray over a wide area. Filled to its 8L capacity, it can readily be pressurised using the large pumping handle on the filler cap. Over-pressure will be expelled via the relief valve. The tank has a shoulder strap for easy,
Lire la description complète
Description
The Pump Up Compression Sprayer – 8L is the ideal tool for applying a foliar spray over a wide area. Filled to its 8L capacity, it can readily be pressurised using the large pumping handle on the filler cap. Over-pressure will be expelled via the relief valve. The tank has a shoulder strap for easy, hands-free carrying, and the long-reach spray wand is on a flexible hose, allowing free movement. Adjust the nozzle for a fine mist or pinpoint jet, press the lockable trigger and spray! Suitable for any foliar spray treatments, for mist irrigation of seeds and young plants, or for application of pesticides.
Key selling points:
Technical Specifications:
8L Capacity
Manual pump-up spray
Material: HDPE
FAQs:
Q: Can I keep leftover spray fluids in my Pump Up Sprayer until I need them again?
A: If you will use up the fluids within a few days, it should be OK, if you store the sprayer somewhere cool and away from sunlight. Ideally, detach the spray nozzle and rinse it in clean water. But we recommend that you only charge the sprayer with the amount that you expect to use each time, and after spraying, clean the sprayer thoroughly with water, re-pressurising the sprayer and spraying water through the nozzle until it is clean inside. Then store your sprayer empty and dry.
Purchase this with…
10-485-010 - 50ml Plastic Syringe
10-485-050 - 1L Graduated Jug - 50ml increments
Key selling points:
- Large 8L capacity
- Shoulder strap for easy carrying
- Long-reach spray wand on flexible hose
- Adjustable nozzle
- Lockable trigger control
- Pressure relief valve
Technical Specifications:
8L Capacity
Manual pump-up spray
Material: HDPE
FAQs:
Q: Can I keep leftover spray fluids in my Pump Up Sprayer until I need them again?
A: If you will use up the fluids within a few days, it should be OK, if you store the sprayer somewhere cool and away from sunlight. Ideally, detach the spray nozzle and rinse it in clean water. But we recommend that you only charge the sprayer with the amount that you expect to use each time, and after spraying, clean the sprayer thoroughly with water, re-pressurising the sprayer and spraying water through the nozzle until it is clean inside. Then store your sprayer empty and dry.
Purchase this with…
10-485-010 - 50ml Plastic Syringe
10-485-050 - 1L Graduated Jug - 50ml increments
Spécifications
| UK RRP | £27.60 |