Sicce SYNCRA ADV 7.0 Pump - 7000L/hr

No. d'article 10-450-057
The SICCE Syncra ADV 7.0 is a quiet-running, high performance submersible liquid pump suitable for any application in hydroponic, freshwater or marine (salt-water) systems. The compact design includes a ceramic shaft and self-cleaning impeller with protective disc to keep debris out of the rotor
Lire la description complète
Indisponible Stock bas En stock
Ce produit ne peut être commandé en ce moment.
Description
The SICCE Syncra ADV 7.0 is a quiet-running, high performance submersible liquid pump suitable for any application in hydroponic, freshwater or marine (salt-water) systems. The compact design includes a ceramic shaft and self-cleaning impeller with protective disc to keep debris out of the rotor chamber. Inlet may be either direct (submersed), intake adjustable, or via hose (inline). 

A 360° rotatable impeller housing allows the outlet port to be oriented in any direction (perpendicular to the rotor axis). Full kit of intake and outlet hose fittings included.  

Key selling points:  
  • Quiet running 
  • High performance 
  • Submersible 
  • Suitable for fresh or salt water, or nutrient solutions 
  • Ceramic shaft and self-cleaning impeller 
  • Outlet port orientable in any direction 
 
Technical Specifications:   
  • Dimensions: 185mm (7.3”) long, 150mm (5.9”) max height. 96mm (3.8”) wide 
  • Max Flow rate: 7000 L/h 
  • Max head: 3.5 m 
  • Power supply: 230- 240V ~ 50Hz, 55W 
  • 3m power lead 
  • Outlet fittings: 
  • Ø25mm barb 
  • Ø32mm barb 
  • 1” BSP female port 
  • Inlet fittings 
  • Ø25mm barb 
  • Ø25mm slip 
  • Ø32mm barb 
  • Ø32mm slip 
  • 1” BSP female port 
  • If submersed, adjustable intake grille allows top or bottom suction and flow regulation 
 
FAQs:  
Q: This pump is submersible. Can I use it out or the water, in a hose line? 
A: Yes, the SICCE Syncra ADV 7.0 can be used inline. But the pump is not self-priming and should not be run dry, so we recommend that it is positioned below the level of the water surface. 

Q: I intend to use the pump submersed. Is the power lead waterproof? 
A: Yes, the power lead is fully waterproof. However, when using the pump submersed, you must ensure that moisture cannot track along the power lead and reach the power socket. To avoid this, either: 

  1. Ensure that the power socket is always above the level of the water surface. 
  1. If the power socket is lower than the water surface, ensure that the power lead is arranged with a “drip-loop”, so that a portion of the lead is significantly lower than the power socket and any moisture will drip from the lead before reaching the socket. 

Spécifications
UK RRP £264.00
    Chargement en cours
    Chargement en cours